Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

大型飞机迎角保护控制律设计及试飞技术研究

针对大型飞机迎角保护控制律设计及试飞问题,通过杆位移-过载梯度的实时精确调整及取大值逻辑指令切换,设计了迎角保护控制律,实现拉杆到底飞机迎角达到且不超过限制迎角的目的。根据迎角保护控制律的功能及试飞目的,将整个试飞过程分为三个阶段,研究了各个阶段的试飞技术。仿真结果表明,所设计的控制律能够实现迎角保护功能,具有良好的控制效果。     

基于分数阶微积分理论的最优导引律设计

随着技术的发展及战场环境的日益复杂化,拦截机动目标的需求越来越大。然而传统制导律在拦截机动目标时存在制导精度差、末端过载突变的问题,故提出了一种基于分数阶微积分理论的最优导引律。首先,介绍了分数阶微积分的定义、性质及其数字实现方法;然后,分析了弹目相对运动关系,通过分数阶变阶次建模和最优控制理论推导出了分数阶导引律;最后,仿真结果表明：与传统比例导引法相比,所设计的分数阶最优导引律能够保持比例导引法良好的追踪性能且拦截时间能够缩短2s,末端过载值趋近于0。该方法解决了传统比例导引法在末端由视线角速率发散而导致的末端过载突变问题。     

民用飞机控制律对偏航机动载荷影响分析

飞机机动过程中方向舵快速大幅偏转会使方向舵和垂尾上产生较大气动载荷并传递到后机身,导致 驾驶员来回往复蹬舵造成安全事故。针对 CCAR-25部25.351条规定的偏航机动情况及 CS-25部25.353规定的偏航机动新条款——方向舵往复偏转,本文首先对两种偏航机动条款分别进行分析;然后考虑控制律进行 偏航机动情况机动仿真计算;最后通过比较分析飞机响应运动参数及垂尾载荷计算结果,并分析控制律对偏航 机动载荷的影响。结果表明:对于偏航机动,考虑控制律后飞机的响应幅度有所缓减,导致垂尾载荷有所降低; 对于偏航机动新条款,由于方向舵反向偏转导致侧滑角贡献和方向舵偏度贡献垂尾载荷两者叠加,从而导致垂 尾载荷大幅增加;P-Beta控制律有效降低了方向舵往复偏转的垂尾载荷。     

幂律过程拟合优度检验的功效比较

幂律过程常被用于描述复杂系统的可靠性增长模型和可修系统的可靠性分析。本文考虑定数截尾场合幂律过程的７种拟合优度检验统计量，在备选假设为对数幂律过程时，比较了这７种检验法的功效。大量随机模拟计算表明，当ｒ在较宽的范围内，Ｆ检验法的功效比其余６种检验法都要高。     

基于终端角度约束的二阶滑模制导律设计

针对空地导弹具有终端角度约束条件的制导律设计问题,提出了一种在有限时间内稳定的新型二阶滑模制导律。首先,在弹目相对运动学模型基础上,将终端弹道倾角约束转化为终端视线(LOS)角度约束,作为制导系统的终端控制目标。其次,通过选取一种新型二阶滑模面,结合螺旋控制算法的思想,设计了一种二阶滑模变结构制导律,来抑制系统中的不确定性因素,从而满足零化视线角速率和制导系统的终端角度约束条件的要求。采用一种新的Lyapunov函数,基于Lyapunov稳定性理论,严格证明了制导系统在有限时间内的稳定性。最后,对空地导弹制导系统进行数字仿真,通过和一阶传统滑模制导律以及基于超螺旋算法的二阶滑模制导律进行对比分析,验证了所设计的制导律在保证制导精度的同时,更能在有限时间内提高终端约束角度的精度,并且避免了超螺旋算法中参数选取较多的问题。     

基于特征模型的火箭发动机伺服控制系统设计

以新型大推力火箭发动机为研究对象,提出了基于特征模型的伺服系统控制器设计方法。首先,介绍了特征建模理论并讨论了特征模型参数范围;其次,采用人工蜂群算法实时估计火箭发动机伺服系统特征模型参数,使其满足特征模型输出与实际系统输出特性等价条件;最后,使用黄金分割自适应控制律保证系统在参数估计过程中的闭环稳定性,同时引入前馈跟踪控制律,逻辑积分控制律和逻辑微分控制律使伺服控制系统快速、精确跟踪线位移指令并改善动态性能。仿真结果表明,设计的火箭发动机伺服控制系统指令跟踪精度高,动态特性良好,鲁棒性强。     

飞机稳定尾旋的改出规律研究

研究稳定尾旋的改出方法，即寻求一种操纵规律，可以使飞机从一种稳定状态（稳定尾旋）跳到另一处非失速稳定状态。从系统的全局稳定性观点出发，构造了李雅普诺夫函数，根据输入操纵第一时刻该函数增长速度最大条件，保证尾旋改出过程中飞机振荡状态的频率接近其固有频率，从而救是飞机稳定尾旋的改出规律－－振荡型改了操纵规律。本文静放求解飞机运动的六自由度的方法计算出尾旋改出的时间历程，验证了用简单的三舵面回中难改出稳     

嫦娥一号卫星星地时差校正量计算方法研究

影响月球探测卫星星地时差的因素较多，文章介绍了其计算模型，并对其中的模糊距离进行了详细分析。通过对试验数据的分析，运用最小二乘法，分别建立了集中校时量和均匀校时量计算模型。实际结果表明：运用此两种校时模型和方法可以方便有效地控制嫦娥一号卫星的星地时差，并使其在一段时期内保持在5ms范围以内。     

Design and Application of Discrete Sliding Mode Control with RBF Network-based Switching Law

This article proposes a novel approach combining exponential-reaching-law-based equivalent control law with radial basis function (RBF) network-based switching law to strengthen the sliding mode control (SMC) tracking capacity for systems with uncertainties and disturbances. First, SMC discrete equivalent control law is designed on the basis of the nominal model of the system and the adaptive exponential reaching law, and subsequently, stability of the algorithm is analyzed. Second, RBF network is used to form the switching law in a direct and online manner with sliding-mode-related inputs and by approximating evaluation function; and the method to adjust its parameters is devised. Finally, comparable experiments are carried out to verify the application of the proposed approach to an inner-axis driven by a direct current (DC) torque motor through extra-low speed servo for a high precision flight simulator, and the axis works under deteriorating conditions such as periodically fluctuating torques of motor, nonlinear friction, and time-varying model parameters. The results show that the combined SMC can effectively improve the servo performance, for instance, to a stable 0.000 08 (°)/s speed response, the tracking error would be within 0.000 08° in 98% of operating times. Moreover, the hybrid nature of the approach imparts the RBF network the features of removing offline training and ease to set initial parameters.